Digital SAT Math · Geometry and Trigonometry

SAT Circles Practice Questions

Circle questions cover the circle equation (x − h)² + (y − k)² = r², arc length, sector area, central and inscribed angles, and tangent lines.

Questions in the bank
213
Easy / Medium / Hard
65 / 97 / 51
Subtopics
22
Typical time
~1.2 min each

Updated . Questions are original BlitzSAT items written to the College Board's published skill specifications. They are not official SAT questions.

How Circles questions appear on the SAT

Circle equations to rewrite by completing the square, diagrams with arcs and central angles, and questions in radians.

Circles is part of the Geometry and Trigonometry domain, which makes up about 15% of the Math section (5–7 questions per test). A calculator is allowed on every Math question, and the built-in Desmos graphing calculator is available in Bluebook.

How to approach Circles questions

  1. 1From (x − h)² + (y − k)² = r², read the center (h, k) and the radius r. Remember to take the square root of r².
  2. 2If the equation is expanded, complete the square for x and for y to find the center and radius.
  3. 3Arc length and sector area are fractions of the full circle: (central angle ÷ 360°) × circumference or area.
  4. 4A tangent line is perpendicular to the radius at the point of tangency.

Common mistakes

  • Reporting r² as the radius.
  • Getting the center's signs wrong, for example (x + 3)² means h = −3.
  • Using an inscribed angle as if it were the central angle. An inscribed angle is half its arc.

10 SAT Circles practice questions with answers

Pick an answer to check it. Each explanation covers the correct answer and why each of the other choices is wrong. The set runs from easy to hard.

0 / 10 answered
1EasyFind a point on a circle from its equation
In a hypothetical transport plan, a circular shuttle route is represented in a coordinate plane by (x−4)2+(y+2)2=10(x-4)^2+(y+2)^2=10, where each coordinate unit represents 1 kilometer. Which point lies on the route?
Show answer and explanation

Answer: D

A point lies on the route if its coordinates satisfy the equation. Substituting (7,−1)(7,-1) gives (7−4)2+(−1+2)2=9+1=10(7-4)^2+(-1+2)^2=9+1=10. Therefore, (7,−1)(7,-1) lies on the route.Why the other choices are wrongAThis is the circle's center, not a point on the circle. Substitution gives 00, not 1010.BThis point is 10 kilometers from the center, treating 1010 as the radius rather than the radius squared. Substitution gives 102+02=10010^2+0^2=100, not 1010.CThis point would satisfy an equation with (y−2)2(y-2)^2, but the given equation contains (y+2)2(y+2)^2. Substitution gives 32+32=183^2+3^2=18, not 1010.
2EasyUse an inscribed angle relation described in words
Four distinct points PP, QQ, RR, and SS lie on a circle in that order around the circle. If ∠PRQ\angle PRQ measures 37∘37^\circ, what is the measure of ∠PSQ\angle PSQ?
Show answer and explanation

Answer: C

Because of the stated order of the points, RR and SS lie on the same arc between PP and QQ. Both inscribed angles intercept the other arc from PP to QQ. Inscribed angles intercepting the same arc have equal measures, so ∠PSQ=37∘\angle PSQ=37^\circ.Why the other choices are wrongAThis halves an inscribed angle's measure. The half-measure rule relates an inscribed angle to its intercepted arc, not to another inscribed angle intercepting that arc.BThis is the measure of the intercepted arc, not the measure of the second inscribed angle.DThis treats the two angles as supplementary. Their vertices lie on the same arc between PP and QQ, so the angles are equal rather than supplementary.
3EasyUse arc length and central angle
For a school project, a student marks an arc on a circle with radius 9 centimeters. The arc corresponds to a central angle of 80∘80^\circ. What is the length of the marked arc, in centimeters?
Show answer and explanation

Answer: A

The circumference is 2π(9)=18π2\pi(9)=18\pi centimeters. The marked arc is 80360=29\frac{80}{360}=\frac29 of the circumference, so its length is 29(18π)=4π\frac29(18\pi)=4\pi centimeters.Why the other choices are wrongBThis results from using πr\pi r instead of 2πr2\pi r for the circumference, making the arc length half its correct value.CThis results from using the diameter, 18 centimeters, as the radius in the arc-length formula, doubling the correct length.DThis is the entire circumference. The marked arc covers only 80∘80^\circ of the circle's 360∘360^\circ.
4MediumRelate diameter endpoints to a center
On a coordinate plan for a library, a circular seating area has center (4,−1)(4,-1). One endpoint of a diameter is (−3,2)(-3,2). What are the coordinates of the other endpoint of this diameter?
Show answer and explanation

Answer: A

The center is the midpoint of the diameter. If the other endpoint is (x,y)(x,y), then (−3+x)/2=4(-3+x)/2=4 and (2+y)/2=−1(2+y)/2=-1. Solving gives x=11x=11 and y=−4y=-4, so the other endpoint is (11,−4)(11,-4).Why the other choices are wrongBThis is the midpoint of the given endpoint and the center, not the opposite endpoint of the diameter.CThese are the components of the displacement from the given endpoint to the center. That displacement must be added to the center to locate the opposite endpoint.DThis adds the given endpoint's coordinates to twice the center's coordinates. The midpoint equations require subtracting the given endpoint's coordinates instead.
5MediumUse a tangent-radius perpendicularity constraint
For a hypothetical school project, a student draws a circle with center OO and a point PP outside the circle. Segment PTPT is tangent to the circle at TT. If OP=17OP=17 centimeters and PT=15PT=15 centimeters, what is the diameter, in centimeters, of the circle?
Show answer and explanation

Answer: A

Radius OTOT is perpendicular to tangent segment PTPT, so triangle OTPOTP is a right triangle with hypotenuse OPOP. Thus OT2+152=172OT^2+15^2=17^2, giving OT2=289−225=64OT^2=289-225=64 and OT=8OT=8 centimeters. The diameter is 2(8)=162(8)=16 centimeters.Why the other choices are wrongBThis is the radius found using the Pythagorean theorem. The diameter is twice the radius.CThis adds 17217^2 and 15215^2, incorrectly treating the radius as the hypotenuse. The hypotenuse is OPOP, opposite the right angle at TT.DThis doubles OPOP, but PP is outside the circle, so OPOP is not a radius.
6MediumUse circumference and radius
In a hypothetical library renovation, a circular reading platform has a circumference of 6π6\pi meters. A circular border will surround the platform and share its center. The border’s outer edge will be 0.50.5 meter farther from the center than the platform’s edge. What will be the circumference, in meters, of the border’s outer edge?
Show answer and explanation

Answer: A

Using C=2πrC=2\pi r, the platform’s radius is 6π/(2π)=36\pi/(2\pi)=3 meters. The outer radius is therefore 3+0.5=3.53+0.5=3.5 meters, so the outer circumference is 2π(3.5)=7π2\pi(3.5)=7\pi meters.Why the other choices are wrongBThis increases the circumference by 0.5π0.5\pi meters. A radius increase of 0.50.5 meter increases the circumference by 2π(0.5)=π2\pi(0.5)=\pi meter.CThis uses an outer radius of 44 meters, adding the border’s width twice to the radius instead of once.DThis treats the platform’s diameter, 66 meters, as its radius and calculates 2π(6+0.5)2\pi(6+0.5).
7MediumUse sector area and central angle
In a hypothetical materials experiment, one face of a circular disk with radius 88 centimeters is coated. A sector receives 55 milligrams of coating per square centimeter, and the rest of that face receives 22 milligrams of coating per square centimeter. The total mass of coating on the face is 176π176\pi milligrams. What is the measure, in degrees, of the sector's central angle?
Show answer and explanation

Answer: B

The disk's face has area π(8)2=64π\pi(8)^2=64\pi square centimeters. Coating the entire face at the lower rate would require 2(64π)=128π2(64\pi)=128\pi milligrams. The sector therefore accounts for an additional 176π−128π=48π176\pi-128\pi=48\pi milligrams. Since its coating rate is 5−2=35-2=3 milligrams per square centimeter greater, the sector's area is 48π/3=16π48\pi/3=16\pi square centimeters. It occupies 16π/(64π)=1/416\pi/(64\pi)=1/4 of the disk, so its central angle is (1/4)(360)=90(1/4)(360)=90 degrees.Why the other choices are wrongAThis results from dividing the additional 48π48\pi milligrams by 55 rather than by the rate difference, 5−2=35-2=3. The lower-rate baseline already includes 22 milligrams per square centimeter within the sector.CThis results from dividing the additional 48π48\pi milligrams by the lower coating rate, 22, giving an incorrect sector area of 24π24\pi square centimeters. The additional mass must be divided by the rate difference, 33.DThis results from assigning all 176π176\pi milligrams to the sector and dividing by 55, giving an incorrect sector area of 35.2π35.2\pi square centimeters. Some of the total coating mass is on the rest of the disk.
8HardComplete the square in a circle equation
In a coordinate plan for a hypothetical community garden, a circular border has equation
x2+y2−2tx+6y+8t−16=0,x^2+y^2-2tx+6y+8t-16=0,
where tt is a real constant. The circle is tangent to the line y=2y=2, and every point on the circle satisfies x≥0x\geq 0. What is the value of tt?
Show answer and explanation

Answer: A

Completing the square gives (x−t)2+(y+3)2=t2−8t+25(x-t)^2+(y+3)^2=t^2-8t+25. The center is (t,−3)(t,-3). Since the circle is tangent to y=2y=2, its radius is 55, so t2−8t+25=25t^2-8t+25=25. Thus t(t−8)=0t(t-8)=0, giving t=0t=0 or t=8t=8. Every point must satisfy x≥0x\geq0, so the leftmost coordinate, t−5t-5, must be nonnegative. Only t=8t=8 satisfies this condition.Why the other choices are wrongBThis value satisfies the tangency condition, but the circle would have center (0,−3)(0,-3) and radius 55, placing some points to the left of the yy-axis.CThe tangency condition determines that the radius is 55, not that the center's horizontal coordinate tt is 55.DThis results from omitting the 99 added when completing the square in yy, incorrectly obtaining a squared radius of (t−4)2(t-4)^2. The actual squared radius at t=9t=9 is 3434, not 2525.
9HardFind a circle parameter from an explicitly stated point
For a real constant aa, the equation (x−a)2+y2=24−2a(x-a)^2+y^2=24-2a represents a circle that passes through (6,2)(6,2). Every point on the circle has a positive xx-coordinate. What is the value of aa?
Show answer and explanation

Answer: B

Substituting (6,2)(6,2) gives (6−a)2+4=24−2a(6-a)^2+4=24-2a. Simplifying yields a2−10a+16=(a−2)(a−8)=0a^2-10a+16=(a-2)(a-8)=0, so a=2a=2 or a=8a=8. The circle has center (a,0)(a,0) and radius 24−2a\sqrt{24-2a}. For a=2a=2, its leftmost xx-coordinate is 2−20<02-\sqrt{20}<0, violating the restriction. For a=8a=8, the leftmost xx-coordinate is 8−8>08-\sqrt{8}>0. Therefore, a=8a=8.Why the other choices are wrongAThis value makes the circle pass through (6,2)(6,2), but its radius is 20>2\sqrt{20}>2, so part of the circle lies to the left of the yy-axis.CThis results from imposing tangency to the yy-axis: a2=24−2aa^2=24-2a has positive solution 44. Tangency would include a point with x=0x=0, and this circle also fails to pass through (6,2)(6,2).DThis assumes the center must lie directly below (6,2)(6,2). Substitution with a=6a=6 gives 44 on the left side and 1212 on the right, so the point is not on that circle.
10HardRead center and radius from a circle equation
In a hypothetical school design project, a circular outline is represented by x2+y2−2kx+6y+5k−11=0x^2+y^2-2kx+6y+5k-11=0, where kk is positive. The radius of the circle is kk coordinate units. Which choice gives the center and radius of the circle?
Show answer and explanation

Answer: C

Completing the squares gives (x−k)2+(y+3)2=k2−5k+20(x-k)^2+(y+3)^2=k^2-5k+20. The center is (k,−3)(k,-3), and the squared radius is k2−5k+20k^2-5k+20. Since the radius is kk, we have k2=k2−5k+20k^2=k^2-5k+20, so k=4k=4. Thus, the center is (4,−3)(4,-3) and the radius is 44 units.Why the other choices are wrongAThis results from omitting the 99 added when completing the square for y2+6yy^2+6y. That omission incorrectly gives a squared radius of k2−5k+11k^2-5k+11 and hence k=11/5k=11/5.BThis reverses the signs of both center coordinates. The expression (x−4)2+(y+3)2(x-4)^2+(y+3)^2 indicates a center of (4,−3)(4,-3), not (−4,3)(-4,3).DWith k=4k=4, the right side of the standard circle equation is 1616. This is the squared radius, so the radius is 44, not 1616.

These are 10 of 213 questions on this skill in the BlitzSAT question bank.

Practice the rest by difficulty, timed or untimed, with your history saved. Free, no credit card.

Practice all 213 questions

What the 213 Circles questions cover

The BlitzSAT bank splits this skill into 22 subtopics. Counts are from the current bank. 61 questions (29%) are student-produced responses, where you type in your answer. 12 include a graph, table, or figure.

SubtopicQuestionsEasyMediumHard
Complete the square in a circle equation226106
Find a circle parameter from an explicitly stated point20695
Find a point on a circle from its equation20695
Relate diameter endpoints to a center20695
Use a tangent-radius perpendicularity constraint20695
Use an inscribed angle relation described in words20695
Use arc length and central angle20695
Use circumference and radius20695
Use sector area and central angle20695
Read center and radius from a circle equation19685
Combine an inscribed angle with the arc-length formula1010
Convert a central angle into a minor arc length1100
Find the whole chord after solving for its half1010
Identify the arc intercepted by an inscribed angle1100
Include both radii when finding a sector perimeter1010
Infer a central angle from an arc and radius1100
Recover a radius from sector area and central angle1010
Relate an angle between tangents to a central angle1100
Translate equal chords into equal central angles1010
Use a diameter to identify a right triangle1010
Use a perpendicular from the center to bisect a chord1010
Use the radius perpendicular to a tangent1100

Other Geometry and Trigonometry skills

More Math skills

Keep going