Digital SAT Math · Algebra

SAT Linear Inequalities Practice Questions

These questions ask you to solve, write, or interpret linear inequalities and systems of inequalities, often from a budget or capacity constraint.

College Board skill name: Linear inequalities in one or two variables

Questions in the bank
208
Easy / Medium / Hard
62 / 97 / 49
Subtopics
18
Typical time
~1.2 min each

Updated . Questions are original BlitzSAT items written to the College Board's published skill specifications. They are not official SAT questions.

How Linear Inequalities questions appear on the SAT

Word problems with 'at least', 'at most', or 'no more than'; graphs of shaded regions; and questions asking which point satisfies a system of inequalities.

Linear Inequalities is part of the Algebra domain, which makes up about 35% of the Math section (13–15 questions per test). A calculator is allowed on every Math question, and the built-in Desmos graphing calculator is available in Bluebook.

How to approach Linear Inequalities questions

  1. 1Translate 'at least' as ≥ and 'at most' or 'no more than' as ≤.
  2. 2Flip the inequality sign when you multiply or divide both sides by a negative number.
  3. 3To test whether a point satisfies a system, substitute it into every inequality.
  4. 4For a maximum or minimum count of whole items, round in the direction the constraint allows, not to the nearest integer.

Common mistakes

  • Forgetting to flip the sign after dividing by a negative.
  • Rounding 12.6 items up to 13 when the constraint is a maximum.
  • Mixing up which side of a boundary line is shaded.

10 SAT Linear Inequalities practice questions with answers

Pick an answer to check it. Each explanation covers the correct answer and why each of the other choices is wrong. The set runs from easy to hard.

0 / 10 answered
1EasyCombine upper and lower linear bounds
Under a hypothetical library's delivery policy, each delivery must contain at least 8 book bins and at most 13 book bins. If bb is the number of book bins in a delivery, which inequality represents this policy?
Show answer and explanation

Answer: A

At least 8 means b≥8b\geq8, and at most 13 means b≤13b\leq13. Both endpoints are allowed, so the combined inequality is 8≤b≤138\leq b\leq13.Why the other choices are wrongBThis excludes a delivery of exactly 8 bins, which the phrase 'at least 8' allows.CThis excludes a delivery of exactly 13 bins, which the phrase 'at most 13' allows.DThis excludes both 8-bin and 13-bin deliveries, although both meet the policy.
2EasyCheck an ordered pair against two inequalities
In a hypothetical environmental monitoring test, two sensor readings, xx and yy, meet the test criteria when x+y≤9x+y\leq 9 and y>2xy>2x. Which ordered pair (x,y)(x,y) meets both criteria?
Show answer and explanation

Answer: D

For (2,5)(2,5), the sum is 2+5=7≤92+5=7\leq 9, and 5>2(2)=45>2(2)=4. Therefore, this pair meets both criteria.Why the other choices are wrongAAlthough 2+4≤92+4\leq 9, the second criterion requires 4>44>4, which is false. Equality is not allowed in the strict inequality.BAlthough 7>2(3)7>2(3), the sum is 3+7=103+7=10, which exceeds 99.CThe sum is within the limit, but 3<2(4)3<2(4), rather than 3>2(4)3>2(4).
3EasyInterpret a boundary line algebraically
For a hypothetical school project, students have 40 meters of decorative tape. Each small display uses 2 meters, and each large display uses 5 meters. Let xx and yy represent the numbers of small and large displays, respectively. Which equation represents the boundary line of the tape-availability inequality, where exactly all the tape is used?
Show answer and explanation

Answer: A

The small displays use 2x2x meters of tape, and the large displays use 5y5y meters. The availability inequality is 2x+5y≤402x+5y\leq 40. Its boundary line, where the full 40 meters is used, has equation 2x+5y=402x+5y=40.Why the other choices are wrongBThis exchanges the tape requirements: small displays use 2 meters each, not 5, and large displays use 5 meters each, not 2.CThis describes using zero meters of tape rather than reaching the 40-meter availability limit.DThis sets the number of displays equal to 40 instead of accounting for the different tape amounts each display uses.
4MediumSolve an inequality with a negative coefficient
In a hypothetical community garden, a tank initially contains 92 liters of water. Workers use 12 liters to clean equipment and then use 4 liters for each seedling tray they water. They must leave at least 28 liters in the tank. If tt is the nonnegative whole number of trays watered, which inequality describes the possible values of tt?
Show answer and explanation

Answer: A

After cleaning and watering, the tank contains 92−12−4t=80−4t92-12-4t=80-4t liters. The reserve requirement gives 80−4t≥2880-4t\geq 28, so −4t≥−52-4t\geq -52. Dividing by −4-4 reverses the inequality, giving t≤13t\leq 13.Why the other choices are wrongBThis fails to reverse the inequality when dividing −4t≥−52-4t\geq -52 by a negative number. Watering more than 13 trays would leave less than the required reserve.CThis results from 92−4t≥2892-4t\geq 28, which overlooks the 12 liters used to clean equipment.DThis allows all 80 liters remaining after cleaning to be used for trays, ignoring the required 28-liter reserve.
5MediumTranslate an at-least requirement
A planned community garden already has 18 liters of soil available for its planting beds. The garden will purchase xx bags containing 6 liters of soil each and set aside 20% of the newly purchased soil for another purpose. None of the existing 18 liters will be set aside. Which inequality represents the requirement that at least 90 liters of soil be available for the planting beds?
Show answer and explanation

Answer: D

The garden retains 80% of the 6x6x liters purchased, giving 0.8(6x)=4.8x0.8(6x)=4.8x liters for the beds. Including the existing soil, the available amount is 18+4.8x18+4.8x liters. “At least 90” means greater than or equal to 90, so 18+4.8x≥9018+4.8x\ge90.Why the other choices are wrongAThis counts all newly purchased soil as available for the beds, ignoring the 20% set aside.BThis sets aside 20% of the existing 18 liters as well as the purchased soil, although only newly purchased soil is subject to that reduction.CThis correctly represents the available soil but imposes a maximum of 90 liters instead of the required minimum.
6MediumTranslate an at-most requirement
In a hypothetical workshop, a machine requires 18 minutes of setup once at the start of each production session. After setup, the machine takes 4 minutes to finish each panel and 7 minutes to finish each frame. A session, including setup, can last at most 150 minutes. If xx panels and yy frames are finished in a session, which inequality represents this time requirement?
Show answer and explanation

Answer: B

The total session time is 18+4x+7y18+4x+7y minutes. Since at most 150 minutes are allowed, 18+4x+7y≤15018+4x+7y\leq150. Subtracting the 18-minute setup time gives 4x+7y≤1324x+7y\leq132, which is choice B.Why the other choices are wrongAThis reverses the bound: it requires at least 132 minutes of finishing time rather than at most 132 minutes.CThis allows all 150 minutes for finishing and fails to reserve 18 minutes for setup.DThis adds 18 minutes of setup to every panel and every frame, although setup occurs only once per session.
7MediumFind an integer satisfying a budget bound
For a hypothetical materials experiment, a team has a budget of $180. It must pay a single $24 equipment fee. Test strips are sold only in packages of 4 for $17 per package, and the team already has 5 usable strips. Each complete trial consumes 3 strips. There are no other costs. What is the greatest number of complete trials the team can conduct without exceeding its budget?
Show answer and explanation

Answer: C

After the equipment fee, the team has 180−24=156180-24=156 dollars. Since 17p≤15617p\le156, it can buy at most 9 whole packages. These provide 36 strips, giving 36+5=4136+5=41 strips altogether. The inequality 3t≤413t\le41 allows at most 13 complete trials. Nine packages and the fee cost $177, so this plan is within budget.Why the other choices are wrongAThis counts the 12 trials supported by the 36 purchased strips but ignores the 5 strips already available.BThis rounds 41/341/3 up. Fourteen complete trials require 42 strips, one more than the maximum available within budget.DIgnoring the equipment fee would allow 10 packages, giving 45 total strips and 15 trials. However, 10 packages plus the fee cost $194.
8HardFind an extremal feasible integer quantity
A community garden plans to install at least 23 beds using no more than 93 bags of soil. Compact beds must be installed in pairs, and each pair requires 7 bags of soil in total. Large beds can be installed individually, and each large bed requires 5 bags of soil. What is the greatest number of large beds the garden can install?
Show answer and explanation

Answer: C

Let pp be the number of compact-bed pairs and LL the number of large beds. Then 2p+L≥232p+L\geq23 and 7p+5L≤937p+5L\leq93. The first inequality gives 7p≥80.5−3.5L7p\geq80.5-3.5L, so the second requires 80.5+1.5L≤9380.5+1.5L\leq93. Thus L≤25/3L\leq25/3, making 8 the largest possible integer candidate. However, 8 large beds require at least 8 compact-bed pairs to reach 23 beds, using 8(7)+8(5)=968(7)+8(5)=96 bags. With 7 large beds and 8 pairs, there are 23 beds using 8(7)+7(5)=918(7)+7(5)=91 bags. Therefore, the maximum is 7.Why the other choices are wrongAThis uses the integer bound obtained before accounting for whole pairs. Eight large beds would require at least eight compact-bed pairs, exceeding the soil limit.BThis unnecessarily restricts the large beds to an even number. Only compact beds must be installed in pairs; seven large beds are feasible.DThis divides the soil supply by 5 but ignores the requirement of at least 23 beds. Eighteen large beds use 90 bags, leaving too little soil for even one compact-bed pair.
9HardDetermine a parameter for a specified feasible point
For a real constant p≠2p\ne2, consider the system of inequalities
xp−2+y≤4\frac{x}{p-2}+y\le4
2x−y≥p−5.2x-y\ge p-5.
Which choice describes all values of pp for which (3,1)(3,1) is a solution to the system?
Show answer and explanation

Answer: A

Substituting (3,1)(3,1) into the first inequality gives 3/(p−2)≤33/(p-2)\le3. If p<2p<2, the left side is negative, so the inequality holds. If p>2p>2, multiplying by the positive denominator gives 3≤3(p−2)3\le3(p-2), so p≥3p\ge3. The second inequality gives 6−1≥p−56-1\ge p-5, or p≤10p\le10. Combining both conditions yields p<2p<2 or 3≤p≤103\le p\le10.Why the other choices are wrongBThis omits all values below 2. For those values, 3/(p−2)3/(p-2) is negative and therefore is at most 3; the second inequality also holds.CThis gives the condition from the first inequality alone. Values above 10 violate the second inequality, which requires p≤10p\le10.DFor p>2p>2, the denominator is positive, so multiplication does not reverse the inequality. The resulting condition is p≥3p\ge3, not p≤3p\le3.
10HardDistinguish strict and inclusive contextual bounds
In a hypothetical materials experiment, a device has a control setting xx, where 0≤x≤100\le x\le 10. During each trial, a fluctuation dd can be any real number from −2-2 through 33, inclusive. Two scores are calculated as follows:
P=x+2dQ=2x−dP=x+2d\qquad Q=2x-d
A trial is accepted if PP is at least 1010 or QQ is greater than 1414, or both. Which inequality exactly describes all control settings that guarantee acceptance for every allowed value of dd?
Show answer and explanation

Answer: D

If Q>14Q\gt14, the trial is accepted. Otherwise, 2x−d≤142x-d\le14, so d≥2x−14d\ge2x-14. Consequently, P=x+2d≥x+2(2x−14)=5x−28P=x+2d\ge x+2(2x-14)=5x-28. This guarantees P≥10P\ge10 when x≥38/5=7.6x\ge38/5=7.6. Thus, every setting from 7.67.6 through 1010 guarantees acceptance, including 7.67.6 because the bound on PP is inclusive.To show that no smaller setting works, take the allowed fluctuation d=1.2d=1.2. For any x<7.6x\lt7.6, the scores satisfy P=x+2.4<10P=x+2.4\lt10 and Q=2x−1.2<14Q=2x-1.2\lt14, so the trial is not accepted. Therefore, the exact range is 7.6≤x≤107.6\le x\le10.Why the other choices are wrongAThis range guarantees that acceptance is possible, not that it occurs for every fluctuation: choosing d=3d=3 gives P=x+6≥10P=x+6\ge10 when x≥4x\ge4. However, at x=4x=4 and d=0d=0, both scores fail their acceptance conditions.BThis incorrectly excludes x=7.6x=7.6. At that setting, if Q≤14Q\le14, then d≥1.2d\ge1.2 and hence P≥10P\ge10. Equality in the condition on PP is allowed.CThis requires QQ alone to guarantee acceptance: its minimum over the allowed fluctuations is 2x−32x-3, which exceeds 1414 when x>8.5x\gt8.5. It overlooks settings where the two acceptance conditions together cover every fluctuation.

These are 10 of 208 questions on this skill in the BlitzSAT question bank.

Practice the rest by difficulty, timed or untimed, with your history saved. Free, no credit card.

Practice all 208 questions

What the 208 Linear Inequalities questions cover

The BlitzSAT bank splits this skill into 18 subtopics. Counts are from the current bank. 58 questions (28%) are student-produced responses, where you type in your answer. 8 include a graph, table, or figure.

SubtopicQuestionsEasyMediumHard
Check an ordered pair against two inequalities20695
Combine upper and lower linear bounds20695
Determine a parameter for a specified feasible point206104
Distinguish strict and inclusive contextual bounds20695
Find an extremal feasible integer quantity20695
Find an integer satisfying a budget bound20695
Interpret a boundary line algebraically20695
Solve an inequality with a negative coefficient20695
Translate an at-least requirement20695
Translate an at-most requirement20695
Combine two inclusive boundaries in a horizontal slice1010
Compute the length of a feasible vertical slice1010
Count integer points on a horizontal slice including its boundary1100
Find an extremal integer in a strip crossing negative coordinates1010
Find the first integer beyond an excluded boundary1010
Find the least output allowed at a given input1010
Preserve a strict endpoint when combining graph inequalities1010
Reverse a graph-boundary comparison when solving for input1100

Other Algebra skills

More Math skills

Keep going