Digital SAT Math · Algebra

SAT Linear Functions Practice Questions

Linear function questions cover f(x) = mx + b: finding slope and intercepts, evaluating and interpreting a function, and moving between tables, graphs, and equations.

Questions in the bank
208
Easy / Medium / Hard
61 / 97 / 50
Subtopics
18
Typical time
~1.2 min each

Updated . Questions are original BlitzSAT items written to the College Board's published skill specifications. They are not official SAT questions.

How Linear Functions questions appear on the SAT

Function notation, tables of values, graphs, and real-world models where you interpret the slope as a rate and the y-intercept as a starting value.

Linear Functions is part of the Algebra domain, which makes up about 35% of the Math section (13–15 questions per test). A calculator is allowed on every Math question, and the built-in Desmos graphing calculator is available in Bluebook.

How to approach Linear Functions questions

  1. 1Slope is the change in output divided by the change in input. Compute it from any two points in a table or graph.
  2. 2In a context, slope is 'per unit' (dollars per hour) and the y-intercept is the value when the input is 0.
  3. 3To evaluate f(a), substitute a for every x in the function.
  4. 4If the question gives two points, write y − y₁ = m(x − x₁) and rearrange only as far as you need to.

Common mistakes

  • Swapping the roles of x and y when you compute slope from a table.
  • Reading the y-intercept from a graph whose axis does not start at 0.
  • Interpreting slope as a total instead of a rate.

10 SAT Linear Functions practice questions with answers

Pick an answer to check it. Each explanation covers the correct answer and why each of the other choices is wrong. The set runs from easy to hard.

0 / 10 answered
1EasyCompare two linear models
For a hypothetical school mosaic project, two teams' total numbers of painted tiles after ww work sessions are modeled by A(w)=18+7wA(w)=18+7w and B(w)=12+9wB(w)=12+9w. According to the models, how many more tiles does Team B paint per work session than Team A?
Show answer and explanation

Answer: A

The coefficients of ww give the numbers of tiles painted per session: 7 for Team A and 9 for Team B. Team B therefore paints 9−7=29-7=2 more tiles per session.Why the other choices are wrongBThe value 18−12=618-12=6 compares the teams' initial tile counts, not their rates per session.CTeam B paints 9 tiles per session, but the question asks how many more it paints than Team A.DThe value 7+9=167+9=16 is the combined number painted per session, not the difference between the teams' rates.
2EasyEvaluate a function in context
In a hypothetical shuttle plan, the function T(s)=4s+11T(s)=4s+11 gives the total trip time, in minutes, for a route with ss scheduled stops. According to this model, what is the total trip time for a route with 6 scheduled stops?
Show answer and explanation

Answer: D

Substitute 6 for ss: T(6)=4(6)+11=24+11=35T(6)=4(6)+11=24+11=35. The modeled trip time is 35 minutes.Why the other choices are wrongAThis calculates 4(6)4(6) but omits the additional 11 minutes in the model.BThis adds 4+6+114+6+11 instead of multiplying the number of stops by 4.CThis calculates 11(6)+411(6)+4, interchanging the coefficient of ss and the constant term.
3EasyRecover the initial value from later values
In a hypothetical materials experiment, the length of a strip increases at a constant rate of 0.40.4 centimeter per minute. After 55 minutes, the strip is 1212 centimeters long. What was the strip's length, in centimeters, at the start of the experiment?
Show answer and explanation

Answer: A

The strip grew by 0.4(5)=20.4(5)=2 centimeters. Subtracting that growth from its later length gives an initial length of 12−2=1012-2=10 centimeters.Why the other choices are wrongBThis is the length after 5 minutes, not the length at the start.CThis adds the 2 centimeters of growth instead of subtracting them to recover the initial length.DThis is the increase in length during the experiment, not the initial length.
4MediumBuild a linear model with consistent units
The length of a segment is initially 0.8 meters and increases at a constant rate of 30 millimeters every 5 seconds. The function L(t)L(t) gives the segment's length in centimeters tt seconds after the increase begins. Which equation defines LL? (1 meter equals 100 centimeters, and 1 centimeter equals 10 millimeters.)
Show answer and explanation

Answer: A

The initial length is 0.8(100)=800.8(100)=80 centimeters. The increase is 30÷10=330\div10=3 centimeters every 5 seconds, or 3÷5=0.63\div5=0.6 centimeters per second. Therefore, L(t)=80+0.6tL(t)=80+0.6t.Why the other choices are wrongBThe initial value remains in meters instead of being converted to centimeters.CThe rate 30÷5=630\div5=6 is in millimeters per second. It must be divided by 10 to obtain centimeters per second.DThe segment gains 3 centimeters every 5 seconds, not every second. The coefficient must be 3÷53\div5.
5MediumInfer a function rule from equally spaced values
In a hypothetical school project, students paint equal-length, nonoverlapping blocks along a border. The unpainted length L(n)L(n), in centimeters, is a linear function of the number nn of blocks painted. The table shows three values of this function. Which equation defines LL?
Blocks painted, nnUnpainted length, L(n)L(n) (centimeters)
228383
666565
10104747
Show answer and explanation

Answer: C

When the number of painted blocks increases from 2 to 6, the unpainted length changes by 65−83=−1865-83=-18 centimeters. Thus the slope is −18/(6−2)=−4.5-18/(6-2)=-4.5 centimeters per block. Using L(2)=83L(2)=83 in L(n)=b−4.5nL(n)=b-4.5n gives 83=b−983=b-9, so b=92b=92. The rule is L(n)=92−4.5nL(n)=92-4.5n, which also gives L(10)=47L(10)=47.Why the other choices are wrongAThis has the correct slope but uses the length after 2 blocks as the initial length. It gives L(2)=74L(2)=74, not 83.BThis treats the 18-centimeter decrease between rows as the decrease for one block, even though the number of blocks increases by 4. It matches the first row but gives L(6)=11L(6)=11, not 65.DThis makes the unpainted length increase as more blocks are painted. The table shows a decrease of 4.5 centimeters per block.
6MediumIdentify the meaningful domain of a contextual model
A hypothetical materials experiment begins with 41 grams of resin. Each completed trial consumes exactly 3.5 grams, and no resin is added. At least 6 grams must remain after every trial. The function M(n)=41−3.5nM(n)=41-3.5n gives the mass remaining after nn completed trials, with n=0n=0 representing the initial amount. Which set is the meaningful domain of this model?
Show answer and explanation

Answer: C

The reserve requirement gives 41−3.5n≥641-3.5n\geq6, so 3.5n≤353.5n\leq35 and n≤10n\leq10. Because nn counts completed trials, it must be a nonnegative integer. The initial state is included, so the domain is all integers from 0 through 10.Why the other choices are wrongAThis includes noninteger inputs, but the model's input counts completed trials, not fractions of trials.BAfter 11 trials, only 41−3.5(11)=2.541-3.5(11)=2.5 grams would remain, violating the required 6-gram reserve.DThis excludes n=0n=0, even though the model explicitly includes the initial amount before any trials are completed.
7MediumFind an input for a specified output
In a hypothetical materials experiment, the length of an elastic test strip is modeled as a linear function of the applied force for forces from 4 to 18 newtons. The strip is 18 millimeters long when the force is 4 newtons and 28 millimeters long when the force is 9 newtons. According to the model, what applied force, in newtons, makes the strip 36 millimeters long?
Show answer and explanation

Answer: D

The length increases at a rate of (28−18)/(9−4)=2(28-18)/(9-4)=2 millimeters per newton. Increasing the length from 28 to 36 millimeters requires (36−28)/2=4(36-28)/2=4 additional newtons. The required force is therefore 9+4=139+4=13 newtons, which is within the model's stated range.Why the other choices are wrongAThe calculation (36−18)/2=9(36-18)/2=9 gives the additional force needed beyond 4 newtons, not the total force.BDividing 36 by the rate of 2 ignores the model's nonzero length intercept. The linear rule is L(F)=2F+10L(F)=2F+10, not L(F)=2FL(F)=2F.CAdding the 8-millimeter length increase directly to 9 newtons gives 17, but the length increase must first be divided by 2 millimeters per newton.
8HardInterpret a shifted function output
The linear function ff satisfies f(2)=9f(2)=9 and f(8)=−3f(8)=-3. The function gg is defined by g(x)=f(x)+kg(x)=f(x)+k, where kk is a constant. For every real number xx, g(x)=f(x−3)g(x)=f(x-3). If rr is the zero of ff, which statement is true?
Show answer and explanation

Answer: A

The slope of ff is (−3−9)/(8−2)=−2(-3-9)/(8-2)=-2. Decreasing its input by 3 therefore increases its output by (−2)(−3)=6(-2)(-3)=6, so g(x)=f(x)+6g(x)=f(x)+6. Also, g(x)=0g(x)=0 when f(x−3)=0f(x-3)=0. Since f(r)=0f(r)=0, this occurs when x−3=rx-3=r, or x=r+3x=r+3.Why the other choices are wrongBThe output increase is correct, but the zero satisfies x−3=rx-3=r, giving x=r+3x=r+3, not r−3r-3.CThe zero is correct, but a function with slope −2-2 increases by 6 when its input decreases by 3.DBoth directions are reversed: the input change increases the output by 6, and the zero moves from rr to r+3r+3.
9HardInterpret a shifted function input
The linear function ff satisfies f(x+4)=f(x)−10f(x+4)=f(x)-10 for every real number xx, and f(2)=9f(2)=9. A function gg is defined by g(x)=f(x−h)g(x)=f(x-h), where hh is a constant. If g(h2)=24g\left(\frac{h}{2}\right)=24, which expression equals g(t)g(t) for every real number tt?
Show answer and explanation

Answer: C

An input increase of 4 decreases ff by 10, so its slope is −10/4=−5/2-10/4=-5/2. Since f(2)=9f(2)=9, f(x)=−52x+14f(x)=-\frac{5}{2}x+14. Also, g(h/2)=f(h/2−h)=f(−h/2)=5h4+14g(h/2)=f(h/2-h)=f(-h/2)=\frac{5h}{4}+14. Setting this equal to 24 gives h=8h=8. Thus g(t)=f(t−8)g(t)=f(t-8).Why the other choices are wrongAThis reverses the direction of the input shift. The condition gives h=8h=8, and the definition subtracts hh from the input.BThe input at which ff equals 24 is −4-4, but that input equals −h/2-h/2, not −h-h. Therefore, hh is 8, not 4.DThis treats the input −4-4 at which ff equals 24 as the shift constant itself. The condition is −h/2=−4-h/2=-4, which gives h=8h=8, not −4-4.
10HardDetermine a rate from a text table
In a hypothetical materials experiment, identical specimens gain mass during a treatment. At any elapsed time tt, each specimen has the same mass m(t)m(t), and mm is a linear function. Different numbers of specimens are weighed on the same tray, whose mass remains constant but is not given. The table shows the combined mass of the tray and the specimens at each time.
Elapsed time (minutes)Number of specimensCombined mass (grams)
0226
4352
8490
At what rate, in grams per minute, does the mass of each individual specimen increase?
Show answer and explanation

Answer: D

Write m(t)=b+rtm(t)=b+rt, where rr is the rate for one specimen, and let hh be the tray's mass. The rows give h+2b=26h+2b=26, h+3b+12r=52h+3b+12r=52, and h+4b+32r=90h+4b+32r=90. Subtracting consecutive equations gives b+12r=26b+12r=26 and b+20r=38b+20r=38. Subtracting again yields 8r=128r=12, so r=1.5r=1.5 grams per minute. These values imply b=8b=8 grams and h=10h=10 grams, which satisfy all three rows.Why the other choices are wrongAThis computes (90/4−26/2)/8=1.1875(90/4-26/2)/8=1.1875, incorrectly treating the combined mass as specimen mass only. Dividing the tray's mass among different numbers of specimens distorts the rate.BThis computes (52−26)/4=6.5(52-26)/4=6.5, the change in combined mass per minute over the first interval. That change includes an additional specimen, not just growth of an individual specimen.CThis computes (90−52)/4=9.5(90-52)/4=9.5, the change in combined mass per minute over the second interval. The number of specimens increases during that interval, so this is not the rate for one specimen.

These are 10 of 208 questions on this skill in the BlitzSAT question bank.

Practice the rest by difficulty, timed or untimed, with your history saved. Free, no credit card.

Practice all 208 questions

What the 208 Linear Functions questions cover

The BlitzSAT bank splits this skill into 18 subtopics. Counts are from the current bank. 57 questions (27%) are student-produced responses, where you type in your answer. 8 include a graph, table, or figure.

SubtopicQuestionsEasyMediumHard
Interpret a shifted function input21696
Build a linear model with consistent units20695
Compare two linear models20695
Determine a rate from a text table20695
Evaluate a function in context20695
Find an input for a specified output20695
Identify the meaningful domain of a contextual model20695
Infer a function rule from equally spaced values20695
Recover the initial value from later values20695
Interpret a shifted function output19694
Compare outputs of two plotted linear models1010
Convert a graph slope to another time unit1010
Evaluate a translated linear input from a graph1010
Extend a line beyond its labeled points1100
Find an input for a prescribed output1010
Find the zero after vertically translating a line1010
Recover an initial value when the displayed time interval starts later1010
Relate an input scale factor to the slope of a line1010

Other Algebra skills

More Math skills

Keep going