Digital SAT Math · Advanced Math

SAT Quadratic and Exponential Functions Practice Questions

Nonlinear function questions cover quadratic, exponential, polynomial, rational, and radical functions: their graphs, key features, transformations, and models of real situations.

College Board skill name: Nonlinear functions

Questions in the bank
219
Easy / Medium / Hard
75 / 97 / 47
Subtopics
29
Typical time
~1.2 min each

Updated . Questions are original BlitzSAT items written to the College Board's published skill specifications. They are not official SAT questions.

How Quadratic and Exponential Functions questions appear on the SAT

Graphs of parabolas and exponential curves, vertex and factored forms, growth and decay models such as P(t) = 500(1.04)^t, and function transformations.

Quadratic and Exponential Functions is part of the Advanced Math domain, which makes up about 35% of the Math section (13–15 questions per test). A calculator is allowed on every Math question, and the built-in Desmos graphing calculator is available in Bluebook.

How to approach Quadratic and Exponential Functions questions

  1. 1Match the form to the feature: vertex form shows the vertex, factored form shows the x-intercepts, and standard form shows the y-intercept.
  2. 2In a(b)^t, a is the starting value and b is the growth factor. A b of 1.04 means 4% growth per period.
  3. 3f(x) + k shifts the graph up, f(x − h) shifts it right, and −f(x) reflects it across the x-axis.
  4. 4Graph the function in Desmos to check intercepts, the vertex, and end behavior.

Common mistakes

  • Reading the vertex of y = (x − 3)² + 2 as (−3, 2).
  • Treating a growth factor of 1.04 as 104% growth.
  • Shifting the graph in the wrong direction for f(x − h).

10 SAT Quadratic and Exponential Functions practice questions with answers

Pick an answer to check it. Each explanation covers the correct answer and why each of the other choices is wrong. The set runs from easy to hard.

0 / 10 answered
1EasyEvaluate a polynomial or rational function with a stated domain
In a hypothetical transport plan, the function P(d)=d2+3P(d)=d^2+3 predicts the travel time, in minutes, for a delivery route of length dd kilometers. The model has domain 0≤d≤80\leq d\leq 8. What travel time, in minutes, does the model predict for a route that is 4 kilometers long?
Show answer and explanation

Answer: B

The input 4 is in the stated domain. Substituting d=4d=4 gives P(4)=42+3=16+3=19P(4)=4^2+3=16+3=19 minutes.Why the other choices are wrongAThis adds 4+34+3 without squaring the input.CThis calculates 424^2 but omits the added 3 minutes.DThis evaluates 4(4+3)4(4+3), incorrectly treating d2+3d^2+3 as d(d+3)d(d+3).
2EasyInfer roots from factored form
The function ff is defined by f(x)=(x−2)(x−9)f(x)=(x-2)(x-9). What is the larger of the two values of xx for which f(x)=0f(x)=0?
Show answer and explanation

Answer: A

A product is zero when at least one factor is zero. Thus x−2=0x-2=0 or x−9=0x-9=0, giving x=2x=2 or x=9x=9. The larger value is 9.Why the other choices are wrongBThe value 2 is a zero of the function, but it is the smaller zero.CSolving x−9=0x-9=0 gives x=9x=9, not x=−9x=-9.DThe product of the two zeros is 18, but 18 is not itself a zero: neither factor is zero when x=18x=18.
3EasyFind a parameter from function values
In a hypothetical materials experiment, a sample's resistance R(x)R(x), in newtons, is modeled by R(x)=3x2+kR(x)=3x^2+k, where xx is the treatment time in minutes and kk is a constant. If R(2)=19R(2)=19, what is the value of kk?
Show answer and explanation

Answer: B

Substituting x=2x=2 gives 19=3(2)2+k=12+k19=3(2)^2+k=12+k. Subtracting 12 from both sides yields k=7k=7.Why the other choices are wrongAThis subtracts 3(2)=63(2)=6 from 19, omitting the square on the input.CThis subtracts only the coefficient 3 from 19, rather than the entire term 3(2)23(2)^2.DThis adds 12 to 19. Isolating kk in 19=12+k19=12+k requires subtracting 12.
4MediumCompare linear and exponential change using a table
The function ff is linear, and g(x)=abxg(x)=ab^x for positive constants aa and bb. The table gives values of the two functions.
xxf(x)f(x)g(x)g(x)
0203
1266
23212
33824
Which statement correctly compares f(4)f(4) and g(4)g(4)?
Show answer and explanation

Answer: D

The linear function increases by 66 whenever xx increases by 11, so f(4)=38+6=44f(4)=38+6=44. The exponential function doubles whenever xx increases by 11, so g(4)=24⋅2=48g(4)=24\cdot2=48. Thus, g(4)−f(4)=48−44=4g(4)-f(4)=48-44=4.Why the other choices are wrongAThe difference 38−24=1438-24=14 applies at x=3x=3. It does not stay constant because one function has a constant additive change and the other has a constant multiplicative change.BAdding the most recent increase of 1212 to g(3)g(3) would give 3636, leading to 44−36=844-36=8. However, gg is exponential, so its output doubles to 4848 rather than increasing by a fixed 1212.CThis compares g(4)=48g(4)=48 with f(3)=38f(3)=38. The linear function must also be advanced to the next input, giving f(4)=44f(4)=44.
5MediumInterpret an output translation of a nonlinear function
The function ff is defined by f(x)=2x+1x−3f(x)=\frac{2x+1}{x-3} for all real numbers x≠3x\ne 3. The graph of gg is obtained by translating the graph of ff vertically, and the yy-intercept of the graph of gg is (0,53)(0,\frac{5}{3}). Which expression defines g(x)g(x)?
Show answer and explanation

Answer: C

A vertical translation has the form g(x)=f(x)+kg(x)=f(x)+k. Since f(0)=−1/3f(0)=-1/3 and g(0)=5/3g(0)=5/3, the shift is k=5/3−(−1/3)=2k=5/3-(-1/3)=2. Therefore, g(x)=2x+1x−3+2=2x+1+2(x−3)x−3=4x−5x−3g(x)=\frac{2x+1}{x-3}+2=\frac{2x+1+2(x-3)}{x-3}=\frac{4x-5}{x-3}, with the original restriction x≠3x\ne 3.Why the other choices are wrongAThis adds 22 only to the numerator, rather than to the function's output. Its yy-intercept is (0,−1)(0,-1).BThis fails to distribute 22 to the −3-3 when forming the common numerator. Its value at x=0x=0 remains −1/3-1/3.DThis equals f(x)−2f(x)-2, representing a downward shift instead of the required upward shift. Its value at x=0x=0 is −7/3-7/3.
6MediumInterpret a quadratic vertex in context
In a hypothetical library plan, W(x)=x2−12x+52W(x)=x^2-12x+52 models the total number of minutes per day that staff spend resolving return-processing issues when xx self-service stations are installed. The plan allows whole-number values of xx from 0 through 20. Which statement correctly interprets the vertex of this model?
Show answer and explanation

Answer: B

Completing the square gives W(x)=(x−6)2+16W(x)=(x-6)^2+16. The squared term is smallest when x=6x=6, an allowed number of stations. Thus the vertex represents a minimum staff time of 16 minutes per day with 6 stations.Why the other choices are wrongAThis reverses the vertex coordinates: the input 6 represents stations, while the output 16 represents minutes per day.CThe constant 52 is W(0)W(0), the modeled time with no stations, not the minimum value.DThe positive coefficient of x2x^2 means the quadratic opens upward, so its vertex gives a minimum, not a maximum.
7MediumModel exponential decay
In a hypothetical geometric design, the square at stage 00 has an area of 144144 square centimeters. At each subsequent stage, a new square is made with a side length equal to 34\frac34 of the preceding square's side length. Which function gives the area A(n)A(n), in square centimeters, of the square at stage nn, where nn is a nonnegative integer?
Show answer and explanation

Answer: D

A square's area is the square of its side length. Multiplying the side length by 3/43/4 therefore multiplies the area by (3/4)2=9/16(3/4)^2=9/16. Starting from 144144 square centimeters, the area after nn stages is A(n)=144(9/16)nA(n)=144(9/16)^n.Why the other choices are wrongAThis applies the side-length multiplier directly to area instead of squaring it.BThe fraction 7/167/16 is the fraction of area removed at each stage. The multiplier must be the fraction remaining, 9/169/16.CThe initial side length is 1212 centimeters, but the function models area and must start at 144144 square centimeters.
8HardRelate a quadratic text table to its symmetry
In a hypothetical transport plan, D(x)D(x) is the modeled average passenger delay, in minutes, when a departure time is shifted by xx minutes. The function DD is quadratic on 0≤x≤100\leq x\leq 10. The table gives three values.
Departure shift xx (minutes)Average delay D(x)D(x) (minutes)
123
311
68
Two departure shifts within the domain differ by 44 minutes and produce the same modeled average delay. What is the smaller of these two shifts, in minutes?
Show answer and explanation

Answer: C

Write D(x)=ax2+bx+cD(x)=ax^2+bx+c. Using the first two rows gives 8a+2b=−128a+2b=-12, or 4a+b=−64a+b=-6. Using the last two rows gives 27a+3b=−327a+3b=-3, or 9a+b=−19a+b=-1. Subtracting yields a=1a=1, and then b=−10b=-10. The axis of symmetry is therefore x=−b/(2a)=5x=-b/(2a)=5. Equal-output inputs that differ by 44 must each be 22 units from this axis, so they are 33 and 77. The smaller shift is 33 minutes.Why the other choices are wrongASubtracting the full separation of 44 from the axis value 55 gives 11. However, each equal-output input is only half the separation, or 22, from the axis.BThis results from treating x=6x=6, which has the lowest listed delay, as the axis and subtracting 22. The lowest tabulated output need not be the quadratic's minimum; the three rows determine an axis at x=5x=5.DThe value 55 is the axis of symmetry, which is the midpoint of the two shifts, not the smaller shift.
9HardModel exponential growth
In a hypothetical transport plan, daily passenger demand and daily passenger capacity are each modeled as exponential functions of time tt, in years. Demand increases by 44% every 2 years, while capacity increases by 20% every 3 years. At t=0t=0, demand is 58\frac{5}{8} of capacity. Which expression gives the ratio of demand to capacity at time tt?
Show answer and explanation

Answer: D

The demand multiplier after tt years is (1.44)t/2(1.44)^{t/2}, and the capacity multiplier is (1.2)t/3(1.2)^{t/3}. Since 1.44=(1.2)21.44=(1.2)^2, the ratio is 58(1.2)t(1.2)t/3=58(1.2)2t/3\frac{5}{8}\frac{(1.2)^t}{(1.2)^{t/3}}=\frac{5}{8}(1.2)^{2t/3}.Why the other choices are wrongAThe initial demand-to-capacity ratio is 5/85/8, not its reciprocal, 8/58/5.BThe exponent 4t/3=t+t/34t/3=t+t/3 results from multiplying the growth multipliers. A demand-to-capacity ratio requires division, so the exponents must be subtracted.CThe exponent t/6=t/2−t/3t/6=t/2-t/3 treats the demand multiplier as (1.2)t/2(1.2)^{t/2}. In fact, (1.44)t/2=(1.2)t(1.44)^{t/2}=(1.2)^t.
10HardInterpret an input translation of a quadratic
The function f(x)=ax2+bx+cf(x)=ax^2+bx+c, where a>0a>0, satisfies f(1)=f(9)f(1)=f(9). The function gg is defined by g(x)=f(x−h)g(x)=f(x-h), where h>0h>0. If g(9)=f(3)g(9)=f(3) and gg attains its minimum at an input greater than 8, what is the value of hh?
Show answer and explanation

Answer: C

Since f(1)=f(9)f(1)=f(9), the axis of symmetry of ff is x=5x=5. Therefore, the inputs yielding f(3)f(3) are 3 and its reflection, 7. The equation g(9)=f(3)g(9)=f(3) becomes f(9−h)=f(3)f(9-h)=f(3), so 9−h=39-h=3 or 9−h=79-h=7. Thus, h=6h=6 or h=2h=2. The minimum of g(x)=f(x−h)g(x)=f(x-h) occurs at x=5+hx=5+h. Since this input is greater than 8, h>3h>3, leaving only h=6h=6.Why the other choices are wrongAThis satisfies g(9)=f(3)g(9)=f(3), but it places the minimum of gg at x=7x=7, which is not greater than 8.BThe distance from 5 to 9 is 4, but 9 is not stated to be the minimizing input of gg. With h=4h=4, g(9)=f(5)g(9)=f(5), the minimum value of ff, which differs from f(3)f(3).DFor the valid translation, 11 is the input where gg attains its minimum. The translation parameter is 11−5=611-5=6, not 11.

These are 10 of 219 questions on this skill in the BlitzSAT question bank.

Practice the rest by difficulty, timed or untimed, with your history saved. Free, no credit card.

Practice all 219 questions

What the 219 Quadratic and Exponential Functions questions cover

The BlitzSAT bank splits this skill into 29 subtopics. Counts are from the current bank. 58 questions (26%) are student-produced responses, where you type in your answer. 19 include a graph, table, or figure.

SubtopicQuestionsEasyMediumHard
Compare linear and exponential change using a table20695
Evaluate a polynomial or rational function with a stated domain20695
Find a parameter from function values20695
Infer roots from factored form20695
Interpret a quadratic vertex in context20695
Interpret an input translation of a quadratic20695
Interpret an output translation of a nonlinear function20695
Model exponential decay207112
Model exponential growth20695
Relate a quadratic text table to its symmetry20695
Apply an input translation to an exponential graph1010
Connect graph vertex form with a standard-form coefficient1010
Evaluate a quadratic reconstructed from its vertex and a labeled point1100
Evaluate an absolute-value graph on its other branch1100
Express multistep exponential change as an exact factor1100
Extend an exponential model using a multiplicative interval1100
Find an unmarked input by parabola symmetry1100
Identify a vertical shift in an exponential model1100
Identify the input of an absolute-value minimum1100
Infer a positive exponential factor across multiple input intervals1010
Interpret a downward parabola vertex as a contextual maximum1100
Recover a parabola axis from equal-output points1100
Recover a percent decrease from a multistep exponential ratio1010
Recover a quadratic leading coefficient using a vertex and point1100
Recover exponential initial value from later labeled outputs1010
Separate exponential amplitude from a vertical offset1100
Track a minimum after an output translation1100
Track the vertex input under a horizontal translation1100
Translate the minimum of a V-shaped graph1100

Other Advanced Math skills

More Math skills

Keep going