Digital SAT Math · Geometry and Trigonometry

SAT Area and Volume Practice Questions

Area and volume questions cover the area and perimeter of plane figures and the volume and surface area of solids, including how scaling a figure changes them.

Questions in the bank
204
Easy / Medium / Hard
62 / 93 / 49
Subtopics
11
Typical time
~1.3 min each

Updated . Questions are original BlitzSAT items written to the College Board's published skill specifications. They are not official SAT questions.

How Area and Volume questions appear on the SAT

Questions about rectangles, triangles, circles, prisms, cylinders, cones, and spheres. Most formulas are on the reference sheet the test provides.

Area and Volume is part of the Geometry and Trigonometry domain, which makes up about 15% of the Math section (5–7 questions per test). A calculator is allowed on every Math question, and the built-in Desmos graphing calculator is available in Bluebook.

How to approach Area and Volume questions

  1. 1Open the reference sheet (in Bluebook) instead of relying on memory for cone, sphere, and pyramid formulas.
  2. 2Break composite figures into simple shapes, then add or subtract their areas.
  3. 3If lengths are scaled by k, area scales by k² and volume by k³.
  4. 4Keep π in your work until the last step, and check whether the choices are written in terms of π.

Common mistakes

  • Using the diameter where the formula needs the radius.
  • Scaling volume by k instead of k³.
  • Mixing units, such as a radius in inches and a height in feet.

10 SAT Area and Volume practice questions with answers

Pick an answer to check it. Each explanation covers the correct answer and why each of the other choices is wrong. The set runs from easy to hard.

0 / 10 answered
1EasyCompute a cylinder volume
A right circular cylinder has a radius of 3 units and a height of tt units, where t>0t>0. Which expression gives the volume of the cylinder, in cubic units?
Show answer and explanation

Answer: B

A cylinder's volume is V=πr2hV=\pi r^2h. Substituting r=3r=3 and h=th=t gives V=π(3)2t=9πtV=\pi(3)^2t=9\pi t cubic units.Why the other choices are wrongAThis uses πrh\pi rh instead of πr2h\pi r^2h, leaving the radius unsquared.CThis multiplies the base circumference, 2π(3)2\pi(3), by the height instead of multiplying the base area by the height.DThis incorrectly squares the height. In the cylinder volume formula, the radius is squared, but the height is not.
2EasyCompute a cone or pyramid volume with formula supplied
A proposed game piece for a recreation center is shaped like a pyramid. Its base has an area of 30 square centimeters, and its perpendicular height is 9 centimeters. What is its volume, in cubic centimeters? The volume of a pyramid is V=13BhV=\frac13 Bh, where BB is the base area and hh is the perpendicular height.
Show answer and explanation

Answer: D

Substituting the base area and height gives V=13(30)(9)=90V=\frac13(30)(9)=90 cubic centimeters.Why the other choices are wrongAThis calculates (30+9)/3(30+9)/3, but the formula requires multiplying the base area by the height before dividing by 3.BThis adds the base area and height rather than using the volume formula.CThis calculates BhBh without the factor of 1/31/3 required for a pyramid.
3EasyCompute a sphere volume with formula supplied
A geometric design includes a sphere with a radius of 3 centimeters. What is the volume, in cubic centimeters, of the sphere? (The volume of a sphere of radius rr is V=43πr3V=\frac43\pi r^3.)
Show answer and explanation

Answer: A

Substituting the radius into the supplied formula gives V=43π(3)3=43π(27)=36πV=\frac43\pi(3)^3=\frac43\pi(27)=36\pi cubic centimeters.Why the other choices are wrongBThis squares the radius instead of cubing it, giving 43π(3)2=12π\frac43\pi(3)^2=12\pi.CThis calculates πr3\pi r^3 but omits the factor 43\frac43.DThis calculates 4πr34\pi r^3 but does not divide by 3.
4MediumRelate similar solids using volume scale factors
For a hypothetical school project, students make two geometrically similar solid models with a combined volume of 280280 cubic centimeters. The larger model has a volume of 216216 cubic centimeters and a height of 1818 centimeters. What is the height, in centimeters, of the smaller model?
Show answer and explanation

Answer: B

The smaller model's volume is 280−216=64280-216=64 cubic centimeters. The ratio of corresponding lengths is the cube root of the volume ratio: 64/2163=2/3\sqrt[3]{64/216}=2/3. Therefore, the smaller model's height is 18(2/3)=1218(2/3)=12 centimeters.Why the other choices are wrongAThis applies the area scale factor (2/3)2(2/3)^2 to the height, giving 18(4/9)=818(4/9)=8. Height scales by 2/32/3, not by its square.CThis multiplies the height directly by the volume ratio: 18(64/216)=16/318(64/216)=16/3. Corresponding lengths scale by the cube root of that ratio.DThis reverses the linear scale factor and calculates 18(3/2)=2718(3/2)=27, making the smaller model taller than the larger one.
5MediumRelate similar figures using area scale factors
In a proposed transport plan, two passenger waiting areas have similar polygonal outlines. The smaller waiting area has an area of 320320 square meters, and the larger has an area of 500500 square meters. One side of the smaller waiting area is 2424 meters long. How long, in meters, is the corresponding side of the larger waiting area?
Show answer and explanation

Answer: C

For similar figures, the ratio of areas is the square of the ratio of corresponding lengths. The length scale factor from smaller to larger is 500320=2516=54\sqrt{\frac{500}{320}}=\sqrt{\frac{25}{16}}=\frac{5}{4}. The corresponding side is therefore 24(54)=3024\left(\frac{5}{4}\right)=30 meters long.Why the other choices are wrongAThis uses the area ratio directly as the length scale factor: 24(500320)=37.524\left(\frac{500}{320}\right)=37.5.BThis uses the reciprocal of the required length scale factor: 24(45)=19.224\left(\frac{4}{5}\right)=19.2. A corresponding side of the larger figure must be longer.DThis multiplies by the smaller-to-larger area ratio without taking its square root: 24(320500)=15.3624\left(\frac{320}{500}\right)=15.36.
6MediumFind a missing dimension from a volume
A library's storage box has an interior shaped like a rectangular prism with a volume of 1,9201{,}920 cubic inches. The interior height is 88 inches, and the interior length is 88 inches greater than the interior width. What is the interior width, in inches?
Show answer and explanation

Answer: A

Let the interior width be ww inches. Then 8w(w+8)=1,9208w(w+8)=1{,}920, so w2+8w−240=0w^2+8w-240=0. Factoring gives (w+20)(w−12)=0(w+20)(w-12)=0. Since a width must be positive, w=12w=12 inches. The resulting dimensions give 8(12)(20)=1,9208(12)(20)=1{,}920 cubic inches.Why the other choices are wrongBThis is the interior length, 12+8=2012+8=20 inches, rather than the width.CThis results from 1,920÷(8⋅8)=301{,}920\div(8\cdot8)=30, treating both the height and the length as 88 inches. The length exceeds the width by 88 inches; it is not itself 88 inches.DThe base area is 1,920÷8=2401{,}920\div8=240 square inches, but taking its square root assumes the length and width are equal.
7MediumCompare surface areas of explicitly described prisms
A hypothetical environmental measurement uses two solid blocks with all six faces exposed to air. Block P is a cube with edge length 66 centimeters. Block Q is a right rectangular prism with length 99 centimeters and width 44 centimeters. The blocks have equal volumes. How many square centimeters greater is the total exposed surface area of block Q than that of block P?
Show answer and explanation

Answer: B

Block P has volume 63=2166^3=216 cubic centimeters, so block Q has height 216/(9⋅4)=6216/(9\cdot4)=6 centimeters. Block P's surface area is 6(62)=2166(6^2)=216 square centimeters. Block Q's surface area is 2(9⋅4+9⋅6+4⋅6)=2282(9\cdot4+9\cdot6+4\cdot6)=228 square centimeters. The difference is 228−216=12228-216=12 square centimeters.Why the other choices are wrongAThis counts only one face from each pair of opposite faces: (36+54+24)−(36+36+36)=6(36+54+24)-(36+36+36)=6. Each of those faces has an equally sized opposite face, so the difference must be doubled.CEqual volumes do not imply equal surface areas. The computed surface areas are 228228 and 216216 square centimeters.DThis subtracts the area of only four cube faces, 4(36)=1444(36)=144, from block Q's total surface area: 228−144=84228-144=84. All six faces of the cube are exposed.
8HardCombine density with a geometric volume
In a hypothetical environmental sampling exercise, a container with a right circular cone-shaped interior has an interior height of 12 centimeters and an interior base radius of 4 centimeters. Two materials completely fill the container without mixing. Material P occupies the smaller cone between the apex and a plane parallel to the base, 6 centimeters from the apex as measured along the cone's height. Material Q occupies the rest of the interior and has a uniform density of 1.5 grams per cubic centimeter. The combined mass of the two materials is 100π100\pi grams. What is the uniform density of material P, in grams per cubic centimeter? The volume of a cone is V=13πr2hV=\frac{1}{3}\pi r^2h.
Show answer and explanation

Answer: C

The full interior volume is 13π(4)2(12)=64π\frac{1}{3}\pi(4)^2(12)=64\pi cubic centimeters. The smaller cone has half the full cone's height and therefore half its radius, or 2 centimeters. Its volume is 13π(2)2(6)=8π\frac{1}{3}\pi(2)^2(6)=8\pi cubic centimeters. Material Q occupies 56π56\pi cubic centimeters and has mass 1.5(56π)=84π1.5(56\pi)=84\pi grams. Thus material P has mass 100π−84π=16π100\pi-84\pi=16\pi grams and density 16π8π=2\frac{16\pi}{8\pi}=2 grams per cubic centimeter.Why the other choices are wrongAThis is the average density of both materials together, 100π64π=1.5625\frac{100\pi}{64\pi}=1.5625, rather than the density of material P.BThis incorrectly assumes that half the cone's height contains half its volume. Assigning each material a volume of 32π32\pi gives a density for P of 100π−1.5(32π)32π=1.625\frac{100\pi-1.5(32\pi)}{32\pi}=1.625.DThis divides the combined mass by P's volume, 100π8π=12.5\frac{100\pi}{8\pi}=12.5, without subtracting the mass of material Q.
9HardCompute a composite area described completely in words
A hypothetical community garden is a rectangle measuring 24 meters from west to east and 18 meters from south to north. Two rectangular paths cross at the garden's center. One runs the full north–south length, and the other runs the full east–west length. Each path is centered between the two outer sides parallel to it. The east–west path is twice as wide as the north–south path. The four remaining planting regions are congruent rectangles, each with perimeter 30 meters. What is the total area covered by the paths, counting their intersection only once, in square meters?
Show answer and explanation

Answer: D

Let the north–south path's width be ww meters; the other path's width is 2w2w. Each planting rectangle has dimensions (24−w)/2(24-w)/2 and (18−2w)/2(18-2w)/2. Its perimeter is therefore 42−3w=3042-3w=30, giving w=4w=4. The paths have areas 18(4)=7218(4)=72 and 24(8)=19224(8)=192 square meters. Their 44-by-88 intersection is counted twice in this sum, so the total covered area is 72+192−32=23272+192-32=232 square meters.Why the other choices are wrongAThis treats both paths as 4 meters wide, giving 18(4)+24(4)−4(4)=15218(4)+24(4)-4(4)=152. The east–west path must be twice as wide, or 8 meters wide.BThis is the combined area of the planting regions, 24(18)−232=20024(18)-232=200, rather than the area covered by the paths.CThis adds the two rectangular path areas without subtracting their overlap: 72+192=26472+192=264. The 32-square-meter intersection must be counted only once.
10HardCompute an area from explicit dimensions
For a hypothetical school art project, two triangular regions are painted on a rectangular card. In a coordinate plane where each coordinate unit represents 11 centimeter, the card's vertices are (0,0)(0,0), (18,0)(18,0), (18,12)(18,12), and (0,12)(0,12). The first painted triangle has vertices (0,0)(0,0), (18,0)(18,0), and (0,12)(0,12). The second has vertices (0,0)(0,0), (12,0)(12,0), and (12,8)(12,8). What is the area, in square centimeters, of the portion of the card that lies in exactly one of the two painted triangles?
Show answer and explanation

Answer: D

The triangles have areas 12(18)(12)=108\frac12(18)(12)=108 and 12(12)(8)=48\frac12(12)(8)=48 square centimeters. Their sloping edges have equations y=12−23xy=12-\frac23x and y=23xy=\frac23x, which intersect at (9,6)(9,6). The overlap has vertices (0,0)(0,0), (12,0)(12,0), (12,4)(12,4), and (9,6)(9,6). Splitting it at x=9x=9 gives a triangle of area 12(9)(6)=27\frac12(9)(6)=27 and a trapezoid of area 12(6+4)(3)=15\frac12(6+4)(3)=15, for an overlap of 4242. The sum of the two triangle areas counts the overlap twice, so the area in exactly one triangle is 108+48−2(42)=72108+48-2(42)=72 square centimeters.Why the other choices are wrongAThis is the area lying in both triangles, not the area lying in exactly one.BThis is 108+48−42=114108+48-42=114, the area lying in at least one triangle. It includes the overlapping region.CThis adds the two triangle areas without accounting for their overlap. The overlapping region is counted twice rather than excluded.

These are 10 of 204 questions on this skill in the BlitzSAT question bank.

Practice the rest by difficulty, timed or untimed, with your history saved. Free, no credit card.

Practice all 204 questions

What the 204 Area and Volume questions cover

The BlitzSAT bank splits this skill into 11 subtopics. Counts are from the current bank. 56 questions (27%) are student-produced responses, where you type in your answer. 4 include a graph, table, or figure.

SubtopicQuestionsEasyMediumHard
Relate similar figures using area scale factors237115
Combine density with a geometric volume20695
Compare surface areas of explicitly described prisms20695
Compute a composite area described completely in words20695
Compute a cone or pyramid volume with formula supplied20695
Compute a cylinder volume20695
Compute a sphere volume with formula supplied20794
Compute an area from explicit dimensions20695
Find a missing dimension from a volume20695
Relate similar solids using volume scale factors20695
Recover a trapezoid height from its offset and slanted side1010

Other Geometry and Trigonometry skills

More Math skills

Keep going